SECRET Taylormade Golf SHAFT SETTING (to stop a slice) #golf #secret
Understanding the Slice: Why Does It Happen?
If you’re consistently battling a slice — that pesky ball flight that curves sharply from left to right (for right-handers) — it’s probably due to the clubface angle and swing path at impact. However, one of the most overlooked factors is your golf shaft settings, especially on adjustable drivers like those from Taylormade.
The slice usually arises from an open clubface combined with an outside-to-inside swing path. While swing mechanics are vital to fix, tweaking your Taylormade golf shaft setting can dramatically help reduce or stop that slice.
The Secret Taylormade Shaft Settings to Stop a Slice
Taylormade drivers and fairway woods come with adjustable hosels allowing players to customize loft, lie angle, and shaft orientation. Here’s how to use these settings to counter your slice:
- Adjust the Loft: Increasing your loft slightly (e.g., +1° to +2°) can help create more backspin and reduce side spin, giving straighter ball flight.
- Set the Lie Angle: Flatten the lie by setting it to a lower angle. A more upright lie tends to promote a draw, so for slicers, flattening can reduce the open clubface at impact.
- Shaft Orientation: On manny Taylormade shafts, rotating the shaft sleeve forward can help “close” the clubface at impact.
Step-by-Step Setting to Stop a Slice
| Step | Action | Reason |
|---|---|---|
| 1 | Increase Loft by +1.5° | Adds a little extra backspin to help straighten flight |
| 2 | Flatten Lie Angle by 0.5° | Helps prevent open clubface and slices |
| 3 | Rotate Shaft Forward (if adjustable) | Closes clubface slightly for more draw bias |
| 4 | Test on Range & adjust | Fine-tune settings based on ball flight feedback |
Why Adjusting Your Taylormade Shaft Can Make a Huge Difference
The golf shaft isn’t just a mere connection between your hands and the clubhead. Its flex, torque, weight, and setting dramatically influence how the clubface behaves at impact.
With Taylormade’s adjustable technology, you can fine-tune these parameters to:
- Improve accuracy: Custom settings help square the face at impact.
- enhance Distance: Proper loft and lie maximize energy transfer.
- Increase Forgiveness: Shaft flex and settings can help reduce mishits.
Practical Tips for Using Taylormade Adjustable Shafts to Stop Slicing
- Start With a Baseline: Note your current settings and ball flight to establish what needs to change.
- Adjust One Variable at a Time: change loft, then test, followed by lie angle, then shaft rotation. This prevents confusion about what made the difference.
- Use a Launch Monitor: If possible, use TrackMan or a similar device to see spin axis and face angle data after each tweak.
- Practice Swing Speed: Ensure your swing speed matches the shaft flex for consistent performance.
- Get Professional help: Working with a club fitter experienced with Taylormade settings can speed up the process.
Firsthand Experience: How This Setting Transformed My Drive
As an avid recreational golfer, my slice used to cost me valuable strokes every round. After learning and applying the secret Taylormade golf shaft setting to stop a slice,here’s what changed for me:
- Before: my drives would curve hard right,losing distance and confidence.
- Adjustment: Increased loft +1.5°,flattened lie angle,and rotated the shaft forward.
- After: Noticeably straighter ball flight, more carry distance, and better contact consistency.
This setting allowed me to play confidently off the tee and enjoy lower scores.
Benefits of the Taylormade Shaft Secret Setting
- Reduced Slice: Helps players struggling with fade/slice tendencies to hit straighter shots.
- Improved Ball Flight: Achieves a higher launch and better spin profile for more control.
- Customization: Tailors driver performance equally for beginners and advanced golfers.
- Quick Adjustments: Change in seconds without needing a new club.
- Confidence Booster: Making the shaft adjustment gives mental assurance going into each shot.
FAQs About Taylormade Shaft Settings and Slicing
- Q: can adjusting the shaft alone fix my slice?
- A: While shaft settings can greatly impact your slice, you must combine adjustments with proper swing mechanics for best results.
- Q: How often should I adjust my Taylormade shaft settings?
- A: Adjustments can be made anytime you notice consistent ball flight issues. Many golfers check settings seasonally or after major swing changes.
- Q: Are these settings suitable for all Taylormade driver models?
- A: Most newer Taylormade adjustable drivers (SIM series,Stealth,M series) support these settings. Check your model’s compatibility.
- Q: What if I’m a left-handed player?
- A: The principles remain identical. Just remember that the slice will curve the ball to the left instead,so adjust accordingly.
Additional Resources & Recommended Taylormade Shaft Models
Not all shafts are created equal. Pairing your shaft setting adjustment with the right shaft flex and material can amplify your slice-fighting results. Consider these popular Taylormade shafts known for control and stability:
| Shaft Model | Flex Options | Best For | Price Range |
|---|---|---|---|
| Taylormade Fujikura Ventus | Regular, stiff, X-Stiff | Players seeking low torque and stability | $$$ (Premium) |
| Taylormade Project X HZRDUS | Stiff, X-Stiff | Golfers needing a tight dispersion and low spin | $$$ (Premium) |
| Taylormade Aldila Rogue | Regular, Stiff | Balanced performance and smoother feel | $$ |
| Taylormade Stock White Tie | Regular, Stiff | Great all-around shaft for moderate swing speeds | $ |
